MWM TCG 2016 V16 Gas CHP Containerised Generator – 727 kW

2012 MWM TCG 2016 V16 Gas-Fired Combined Heat & Power (CHP) Generator Set

Available for sale – complete containerised MWM gas engine CHP package

We are pleased to offer this MWM TCG 2016 V16 gas-powered CHP generator set, manufactured in 2012 and configured for efficient, continuous-duty power generation and combined heat and power applications.

Powered by the renowned MWM TCG 2016 V16 gas engine, this unit delivers approximately 727 kW of mechanical engine output at 1,500 rpm, making it an excellent solution for energy-efficient industrial power generation, commercial CHP, distributed energy and onsite cogeneration projects.

The engine is coupled to a Marelli Generators MJB 400L C4 B24 alternator, with the generator nameplate showing a 1,300 kVA rating at 400 V / 50 Hz.

High-Efficiency Gas CHP & Distributed Energy Solution

The MWM TCG 2016 V16 is designed for efficient gas-powered electricity generation, allowing operators to maximise the useful energy obtained from their fuel supply.

In a CHP installation, the electrical generation process can be combined with the recovery of useful engine and exhaust heat, allowing energy that would otherwise be lost to be utilised for hot water, space heating, process heat and other thermal applications.

This combined approach can significantly improve overall energy utilisation compared with conventional power generation where heat is rejected to atmosphere.

The containerised configuration provides a practical and compact solution for projects requiring a complete packaged CHP system. It is particularly suited to industrial facilities, manufacturing sites, commercial buildings, agricultural operations, district heating projects and other high-energy-demand applications.

Key specifications:

• MWM TCG 2016 V16 gas engine
• 2012 manufacture
• 727 kW engine output
• 1,500 rpm
• 50 Hz
• 400 V electrical system
• Containerised CHP package
• Marelli 1,300 kVA alternator
• Designed for efficient gas-powered generation
• Suitable for continuous-duty operation
• Excellent basis for high-efficiency CHP / cogeneration
• Potential to utilise electrical and thermal energy
• Suitable for industrial and commercial onsite generation
• Compact packaged configuration
• Potential for reduced energy losses through onsite generation
• Suitable for projects focused on energy efficiency and fuel utilisation

MWM TCG 2016 V16 – Efficient Gas CHP Technology

The MWM TCG 2016 V16 is a high-output stationary gas engine designed for power-generation and CHP applications. Its 16-cylinder V configuration provides substantial power output within a compact engine package, while the 1,500 rpm operating speed makes it suitable for standard 50 Hz generator applications.

For operators looking to improve energy efficiency, reduce grid dependency and maximise the useful output from their gas supply, a CHP system can provide an attractive solution.

By producing electricity onsite and recovering useful engine heat, CHP technology can make significantly better use of the available fuel energy. Where there is a consistent requirement for both electricity and heat, this can provide an efficient alternative to purchasing electricity from the grid while generating heat separately.

The potential recovery of jacket-water and exhaust heat makes this unit particularly attractive for applications with substantial thermal demand.

Generator / Alternator

The engine is coupled to a Marelli Generators MJB 400L C4 B24 alternator.

Generator Nameplate Specifications

• Rated output: 1,300 kVA
• Voltage: 400 / 415 V
• Frequency: 50 Hz
• Speed: 1,500 rpm
• Power factor: 0.8
• Protection: IP23
• Insulation: Class H
• Ambient rating: 40°C

This engine and alternator combination provides a substantial platform for efficient onsite electricity generation, industrial CHP and distributed-energy projects.

Suitable Applications

This MWM TCG 2016 V16 gas CHP unit could be considered for a wide range of energy-efficiency and power-generation applications, including:

Industrial CHP

Onsite electricity generation combined with useful heat recovery for manufacturing and processing facilities.

Commercial Energy Generation

Suitable for facilities with significant and consistent electrical and thermal demand.

Process Heat Applications

Recovered engine and exhaust heat can potentially be utilised for industrial processes, helping maximise overall fuel utilisation.

District Heating

Potential integration into hot-water heating networks where there is a consistent thermal demand.

Agricultural & Food Processing

Suitable for operations requiring both reliable onsite electricity and useful heat.

Distributed Energy Generation

Generating electricity close to the point of consumption can help reduce transmission losses and provide greater onsite energy independence.

Energy-Efficiency Projects

An attractive platform for projects focused on improving fuel efficiency, increasing energy utilisation and reducing wasted heat.

CHP Replacement & Refurbishment

Suitable as a potential replacement, refurbishment or redevelopment unit for existing CHP installations, subject to inspection and project requirements.

Efficient Onsite Power & Heat Generation

This 2012 MWM TCG 2016 V16 CHP generator represents a substantial opportunity for operators looking for an established gas-powered CHP solution.

With 727 kW of engine output, 1,500 rpm operation, a 1,300 kVA Marelli alternator, and a containerised configuration, the unit provides a strong foundation for an energy-efficient combined heat and power installation.

For sites with a simultaneous demand for electricity and heat, recovering useful thermal energy from the engine can substantially increase the overall utilisation of the fuel input, making CHP an attractive option for industrial energy efficiency and onsite generation.

Contact us today for further information, pricing and availability.